B Grade Closeboard Fencing
Fencing Overvew
B Grade Close board fencing can be built from 1.1 to 1.95 meters tall with either treated timber of concrete posts. This ius a good option for fardens on a slope..

Warranties may not be issued in some cases. This will be agreed before work commencing.
Frame Warranty 7 - 10 years
Cladding Warraty 7 - 8 years
B Grade Close Board Fencing Specifecation
B Grade close board fencing is constructed using 100 x 100 mm softwood pressure treated timber post positioned vertically approximately 2.4 m apart from centre post to centre post. Each post is painted with bitumen paint approximately 600 mm from the bottom of the post upwards. The post is held in place using 1.5 No. 25KG bags of post creat. The post hols are a minimum of 400mm deep with some exceptions to avoid tree roots or foundations. Softwood pressure-treated counter rails and gravel boards are fixed to the vertical posts using 75mm external screws. The softwood pressor treated feather cladding is overlapped by approximately 15mm and nailed through the overlap to all three counter rails. A trenched softwood pressure treated capping is then added and fixed to the top of the fence.
Warrenty Attached to B Grade Close board Fencing
C Grade Closeboard Fencing
Fencing Overvew
This type of fencing can be built from 1.1 to 1.95 meters tall with either concrete or timber posts. Developers most commonly use this grade.
Warrenty Attached to C Grade Close board Fencing

Warranties may not be issued in some cases. This will be agreed before work commencing.
B Grade Close Board Fencing Specifecation
C Grade close board fencing is constructed using 100 x 100 mm softwood pressure treated timber post positioned vertically approximately 3.0 m apart from centre post to centre post. The posts is held in place using 1 No. 25KG bags of post creat. The post hols are a minimum of 400mm deep with some exceptions to avoid tree roots or foundations. Softwood pressure-treated counter rails and gravel boards are fixed to the vertical posts using 75mm external screws. The softwood pressor treated feather cladding is overlapped by approximately 10mm and nailed through the overlap to all three counter rails.